Basic precautions for liquid tank filters:
1. During the transportation and storage process of the high-efficiency filter device, it must be operated in strict accordance with the prescribed standards, such as the direction marked by the manufacturer to be put on hold. In addition, during the transportation, movement, and unloading process, the strength must be Moderate, no violent collisions, let alone violent vibrations, to avoid man-made damage.
2. Before the liquid tank filter high-efficiency filter is installed, the clean room must be cleaned accordingly to ensure that there is no dust accumulation in the purified air-conditioning system, so that the overall cleanliness can reach the relevant standards.
3. Often after the liquid tank filter is brought back, it needs to take a corresponding test run to ensure continuous test run for more than 12 hours, and then perform corresponding cleaning and cleaning again before entering the formal installation procedure.
4. Before installation, the packaging must be unpacked on site, including filter paper and a series of sealing strips, etc., to see if there is a product certificate provided by the manufacturer, and whether the technical performance meets the specified requirements.
5. During the installation process of liquid tank type high-efficiency filter, it is necessary to take effective deployment according to the resistance of each type of filter device to ensure that the rated resistance of each filter is less than the specified standard, and the error cannot exceed the specified range.
6. The material and form of the joints of the liquid tank type high-efficiency filter must meet the corresponding requirements, and there should be no penetration problems at the joints.
7. According to the on-site usage and the overall pollution level, formulate an effective management system to achieve effective management with fixed personnel and timing. During the operation process, the negative pressure pipeline and many pipelines must be kept unblocked.
