How does the air shower ensure that itself is not polluted?

How does the air shower as a dust removal and purification ensure that the body is not polluted?

1. An embedded ultraviolet germicidal lamp is installed inside, and the indoor microbial bacteria are sterilized through the ultraviolet wavelength of 254 microns, thereby inhibiting the growth and reproduction of bacteria. Because ultraviolet rays have certain damage to the human body, it is not suitable for sterilization when personnel is indoors. Generally, a timing device is used to sterilize without personnel. Install a timing device in the control system to automatically start the sterilization system.

2. Built-in micro-ozone sterilization: due to the limitations and dead angles of ultraviolet sterilization, the sterilization effect inside the air shower static pressure compartment is poor, and a micro-ozone generator is embedded in the air shower, which is also installed in the control system. The timing device automatically starts the sterilization system.

3. The high and low speed of the fan requires automatic circulation and self-purification of the internal air. When someone enters the air shower, the air shower fan starts, and the wind speed generally reaches about 25-28 m/s. When the person comes out of the air shower, the air shower fan runs at a low speed and stops after the set time. Such repeated self-cleaning will continuously renew the internal air to ensure the freshness and cleanliness of the indoor air.